Forklift Quiz

1. An employer is required to provide training to employees:

Once every 2 years

Once every 3 years

Once every 4 years

One training is all operators need

2. Which of the following are examples of forklift controls?

Control level

Lights

Horn

All of the above

3. Which of the following is true?

OSHA comes to your place of employment to provide training

Any employee who operates a forklift must be trained

Evaluation of an operator’s use of a forklift can be from a reference

Annual training is mandatory

4. When conducting your pre-operating check, you find that something isn’t working correctly, so what should you do?

Notify your supervisor immediately

Notify your supervisor at the end of your shift

Fix the problem yourself

Use another forklift

5. Which of the following is a regulation from OSHA?

Forklifts must have a backup alarm

Forklifts must have a seat belt

Forklifts must have review mirrors

All of the above

6. Before moving a load, what should the operator do?

Put up warning signs

Implement control measures

Look for any possible hazards

Both b and c

7. What should be done when operating a forklift?

Check to make sure there is overhead clearance

Know the blind spots

Operate the forklift smoothly at all times

All of the above

8. If the weight distribution is not correct, which of the following may happen?

The forklift will move slower

The forklift could tip over

The forklift will accelerate faster

Both b and c

9. What should NOT be done when operating a forklift?

Move the load where it’s needed while driving

Report any collisions immediately

Pay attention at all times

All of the above

10. What is a forklift?

A small truck

A specialty vehicle that has two prongs

A piece of machinery to create a hole

None of the above

Grade Exam

Practice Exam

1. An employer is required to provide training to employees:

2. Which of the following are examples of forklift controls?

3. Which of the following is true?

4. When conducting your pre-operating check, you find that something isn’t working correctly, so what should you do?

5. Which of the following is a regulation from OSHA?

6. Before moving a load, what should the operator do?

7. What should be done when operating a forklift?

8. If the weight distribution is not correct, which of the following may happen?

9. What should NOT be done when operating a forklift?

10. What is a forklift?